Workshop heating 3,000 sq.ft Industrial Electronic Repairs Ltd

Details

Customer Name	Industrial Electronic Repairs Ltd
Location	Wakefield. West Yorkshire
Building Use	Repair of Electronic equipment
Size of Building/Construction	3,000 sq.ft insulated modern portal frame unit
Heaters	One XR20plus Warmco/Winterwarm gas suspended unit heater
Fuel Supply	Natural gas
Ancillary Equipment	One DB8 heater control and one WCUEC40 Winterwarm destratification fan

Customer Brief

Warmco installed an energy efficient workshop heating system for Industrial Electronic Repairs Ltd in April 2025. We were asked to install a Winterwarm Warmco XR20 suspended, gas fired, space heater alongside one Winterwarm WCU40 heat recovery fans into these 3,000 sq ft modern portal framed, premises in Wakefield.

Features of the Heating System

This customer invited us to install a Winterwarm / Warmco, XR20 suspended, gas fired warm air heater into their new premises. The XR20 heater has a maximum heat output of 20.7kw, which can be used to get the area up to temperature. However, once this has been achieved, it can modulate its heat output down to 12.8kw. This modulation feature offers a typical fuel cost saving of up to 30% compared to standard non-modulating heaters. This heater was chosen to heat this 3,000 sq ft space to 20c, when the outside temperature was as low as minus 3c. We also installed a WCU40 de-stratification fans. These can push down 3,200 metres cubed of warm air per hour, which would otherwise gather in the top of the building. The addition of fans can offer an additional fuel cost saving of up to 30%. This workshop heating project was completed in just one day. During this time our engineers worked hard to minimise disruption to the work of our valued customer.

Get a quote

Fields marked with an asterisk(*) are required.

Contact information

Name*

Company name*

Preferred telephone number*

Email address*

Postcode*

Your preferred method of contact*

Telephone

Please tell us about your building

Your building use

Building dimensions*

Please give us the length, width and height of the building to be heated. If your building has an apex, please give us the height to the eaves, then also to the apex.

Unit of measurement*

Please select the unit of measurement for the building dimensions.

Temperature requirements

Age of building / levels of insulation

Fuel source*

Additional information

If there is any other information that you think is relevant, please note it down here.

If you wish to send any extra information such as formal plans, sketch plans or photos these can help us to give you a more accurate quote. Please send these as attachments to contactus@warmco.co.uk and give ‘Quote for your company name / your name’ as the title for your email.

Testimonials

The heater installed by Warmco is absolutely brilliant! It has surpassed our expectations… it is very efficient on gas consumption and overall working with Warmco will save us a lot of money in future. All in all we are over the moon with our heating system and would be very happy to recommend Warmco’s services to anyone.

Russ Moore – A S Plant, Mansfield October 2020

Warmco were very quick to respond to our request for a survey and to quote for our heating; much faster than the response time that I have generally come to expect form other companies. The engineers communicated well and worked round our site requirements, to create minimal disruption to ourselves and our customers. We are pleased with our heating, it is working well. Warmco have been available to assist with giving advice on our system. Overall, we were very impressed from the start to finish of our dealings with Warmco.

Mark Donoghue – Brownhills Leisure World – November 2020

Overall I'm happy with the service provided by Warmco. The site visit and quoting process was good. The install guys were good, on time, seemed to get on with the job and completed it on time with good communications. As for the heaters, as it hasn’t been too cold as yet, I can't comment fully on how effective they are.”

Darrell Freeman – Big Dude Clothing, Ellesmere Port October 2020

Warmco were knowledgeable when it came to recommending a heating system to us. They explained the system in a way that gave us confidence in the products and services they were offering. Most importantly, the price was right. The installation was great, the engineers came when we were told they would, worked round our warehouse operations, did a neat job of the installation and were clean and tidy. We are pleased to say that the heating does exactly what we need it to do.

Kevin Wright – Italy Hair and Beauty Ltd, Wrexham - August 2020